Owner's manual

WHEATHEART - R SERIES AUGERS 5. OPERATION
R8-36, R8-41, R8-46, R8-51, R10-36, R10-41, & R10-51 5.4. OPERATING PROCEDURES
30758 R1 27
5.4.4. CLEANOUT
1. Run the unit to clean out the majority of the grain.
2. Shut down and lock out the power source.
3. Clean grain from the auger and hopper, and dump it into a container.
.
WARNING
Lock out all power before attempting repairs /
removing obstructions.