Instruction Manual

3. ASSEMBLY WHEATHEART - GRAIN AUGER EMD
3.1. TUBES & FLIGHTING GHR 80 X 31’-71’ & 100 X 31’-71’
16 30642 R0
3. Slide tube sections together and secure.
Make sure to align upper and lower track
ends and then tighten bolts. Secure with
hardware in table below.
Important: Track ends must align to allow track shoe to smoothly slide over track joint.
Misalignment may cause jamming.
FOR 8” AND 10” AUGERS, SLIDE
FLIGHTING TOGETHER.
Figure 3.1
Details for fastenings:
Auger For Flighting Amt For Tubes Amt
8” 7/16” x 2-1/4” GR 8 bolts and locknuts 2 7/16” x 1” bolts and locknuts 8
10” 1/2” x 2-3/4” GR 8 bolts and locknuts 2 7/16” x 1” bolts and locknuts 8
Figure 3.3
Figure 3.2