EVO 4.1 EVO 4.2 EVO 4.3 EVO 4.4 EVO 4.C EVO 4.CS EVO 4.
Important Safety Information Before installing this product read all these instructions! ~ This symbol indicates that there are important operating and maintenance instructions in the literature L..!_i accompanying this unit. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Before making any connections, switch all the units in your system off at the mains.
Preparing the EV04 Loudspeakers Stands and Brackets The bookshelf loudspeakers are intended primarily for stand mounting , though they can be mounted on wall brackets or even on sturdy shelves. The quality of loudspeaker stands greatly influences the performance of your loudspeakers, please do not use flimsy products. Centre Channel Loudspeakers Each centre channel loudspeaker is supplied with one set of mounting feet.
Positioning the Front Loudspeakers The EVO4,3, EVO4.4 models are designed to be floor standing. We suggest that they are positioned at least 200mm from the rear walls and 700mm from the side walls, facing slightly inwards. The EVO4.1 and EVO4.2 models should be stand or wall mounted though they may be placed on a rigid shelf. The bass extension will improve if the small speakers are operated close·r to the rear wall.
Connecting the Front Loudspeakers Standard Connection AMPLIFIER Choose a suitable length of twi n core speaker cable for each channel. and prepare the ends. Unscrew each termi nal a few turns. Connect the red , positive(+) terminal of the Left loudspeaker to the corresponding red . positive (+) amplifier terminal. Connect the black, negative (-) terminals similarly. Tighten t he termina ls securely. Repeat this procedure for the Right channel. + ',--1-..,.-_,..
Setting Up a Home Theatre System Placement Front and Effects Channels: The front loudspeakers are placed on either side of the television screen, 2 to 3 metres apart. The speakers should be angled slightly so they car aimed towards the listeners. We recommend placing the rear effects speakers in a high position, behind the listener's head. If the rear or side walls are a long way from the listening seat, consider stand mounting the loudspeakers.
Setting Loudspeaker Sizes and Levels If you are not using a subwoofer: Set the Front speakers to 'Large'. Set the 'Subwoofer' option on the processor to 'Off or 'No'. The Front channels will now receive all the system bass. If you are using a subwoofer: When set to 'Small' all the system bass will go into the subwoofer. If you choose 'Large' the Front channel bass will be reproduced from the Front speakers. Follow the instructions on this page for suitable size and crossover settings.
Looking After Your Loudspeaker Your loudspeakers use a special hardwearing sealed finish. They should not be waxed or treated with spray polishes which will smear and dim the finish . Occasionally polish them with a dry or barely moist cloth to remove dust and finger marks, etc. If you play the speakers with the grilles off exercise great care. NEVER operate speakers with the grilles off if there are children or pets in the house.
Specifications Model EV04.1 I EVO 4.2 EVO 4.3 EVO 4.4 General Description 2-way bookshelf speaker 3-way bookshelf speaker 3-way floorstanding sp_eaker 3-way floorstanding speaker bass reflex Enclosure Type bass reflex bass reflex bass reflex Transducer Complement 2-way 3-way 3-way 3-way Bass Driver 5"(13omml black woven Kevlar cone 6.5"(15omm) black woven Kevlar cone 5'(13omm) black woven Kevlar cone x2 6.
[illWHARFEDALE IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK Tel: +44(0)1480 452561 Fax: +44(0)1480 413403 http://www.wharfedale.co.uk IAG reserves the right to alter the design and specifications without notice. All rights reserved© IAG Group Ltd. Wharfedale is a member of the International Audio Group.
