HD Ready LCD TV USER'S MANUAL Please read this manual carefully before using your television and keep this manual for future reference. MODEL: L1511W-A, L1911W-A Customer helpline:0845 604 0105 Downloaded from www.Manualslib.
Customer helpline:0845 604 0105 Downloaded from www.Manualslib.
Customer helpline:0845 604 0105 Downloaded from www.Manualslib.
To users: Thank you for using our LCD-TV. Before connecting the LCD-TV and turning the power on, please read this book carefully. Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function. CONTENT Safety Notice .......................................................................................1 Front Panel Controls............................................................................. 2 Connection .........
Safety Notice Items To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television.
Front Panel Controls L1911W-A SOURCE MENU 2 VOL- 3 VOL+ CH- 4 CH+ 5 STANDBY 1 L1511W-A SOURCE MENU VOL- VOL+ CH- CH+ POWER 6 7 Control Panel Function 1. Standby switch 2.SOURCE Select the input signals: PC/COMPONENT/HDMI/ TV /SCART/ S-VIDEO 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5.
Connection Options ANT IN AUDIO IN AC power switch Pr Pb Y (Only available in L1911W-A) S-VIDEO TV SCART VGA IN HDMI The figure is just for reference, please see the actual product.) COMPONENT Input Connect a component video/audio device to these jacks COMPONENT/ SVIDEO /VGA Audio Input Connect the PC output connector from a PC to the audio input port ANT IN AUDIO IN Pr Earphone port Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box.
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By MUTE Display current input signal information SLEEP DISPLAY MUTE STANDBY TV channel number select Set time to change the TV into the NICAM PC AUTO AD SOURCE standby status after a period of preset time.
Remote Control Installing Batteries 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin VGA interface VGA IN cable ( not supplied ) to the VGA video interface connector on the PC.
Connection Instructions COMPONENT (If connected to SVIDEO,select the S-VIDEO external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Y Pb Pr S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.
Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Press SOURCE to select SCART mode. 3. Press Play button on external equipment and it should appear on the screen. SCART External equipment HDMI Input HDMI TV HDMI Devices Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure. How to use 1. Select the HDMI source by using the SOURCE button on the remote control. 2.
Basic Operating Instructions Turn on the LCD-TV SLEEP DISPLAY NICAM PC MUTE STANDBY AUTO AD SOURCE PSM When the STANDBYbutton on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the STANDBY button, the LCD-TVwill go into standby mode and the indicator light turns red. .SSM OK Q.
Basic Operating Instructions Select the TV Channel You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8.
Menu Operations 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the OK button to exit the menu Picture Menu Options Picture quality can be adjusted for any input separately . The picture quality on the screen can be adjusted as follows: 1. Press MENU button and V+/V- until the following menu appears on the screen. 2.
Menu Operations Picture Menu Options Continued 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS : By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : The image becomes higher as the number increase.
Menu Operations Audio Menu Options Continued 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right .
Menu Operations Function Menu Options Menu Language Selection : The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice.
Menu Operations Function Menu Options Continued 4. DISPLAY MODE : To select the display mode between 4:3, 16:9 and FULL SCREEN 5.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds if there is no signal. 6. RESET : Press V+ to reset the settings to the factory default . 7. CHILD LOCK: Press V+ to enter it and the following appears on the screen: PASSWORD: ---- If password is correctly entered, the CHILD LOCK menu will be entered.
Menu Operations Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC. PHASE CLOCK H. POSITION V. POSITION 50 50 50 50 Note: This menu only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option 3.Press V+/V- button to increase and decrease the level to match your preference .. 4. Repeat step 2 and step 3 until desired quality has been achieved .
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING TUNING PROGRAM COUNTRY UNITED KINGDOM AUTO SEARCH Note: This menu only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved .. Functions: 1.
Menu Operations . Tuning Menu Options Continued AFC : Auto frequence control . Select ON to improve the image quality . FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/Vbutton to adjust and improve the image quality . EXCHANGE : Press V+ to display the menu as follows: EXCHANGE FROM : 1 TO : 9 EXCHANGE Press P+/- to select the item and then V+/- to adjust the channel and V+ to confirm.
TELETEXT Some menu related functions are not available in TELETEXT mode. MENU and AUTO AD control functions are not available in TELETEXT mode. If the TV is switched on by STANDBY after off in TELETEXT mode, or press SOURCE or PC button, the TELETEXT mode will disappear automatically. SLEEP DISPLAY MUTE POWER NICAM PC AUTO AD TV/AV PSM .SSM OK Q.VIEW Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext.
TELETEXT SUBCODE Button When Teletext information exceeds more than one page , it may take some time for the automatic changing of the sub pages to reach the sub page you require . It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found . Select the required page number using buttons 0-9 . If the top of the page indicates that sub pages are being transmitted yet the page does not change .
Troubleshooting Guide To assist in location possible faults use help guide below. Troubleshooting No picture, no sound Verify if the television is properly plugged in. Verify if the television has a proper supplied power source. Verify if electricity is available. Blank screen Verify if correct signals are input. Press SOURCE button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press MUTE button and verify if Mute mode is set.
Specifications Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model Picture, sound system L1511W-A PAL/SECAM-B/G,I,D/K,L,L Audio output External input port 1.5W+1.
Specifications Customer helpline:0845 604 0105 Downloaded from www.Manualslib.
PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use. In the event of a problem with the product within the guarantee period please call the customer helpline on 0845 604 0105.
Customer helpline:0845 604 0105 Downloaded from www.Manualslib.com manuals search engine V0.
