User guide

PMX

Powered Mixer

PMX 500 MASTER SECTION

7. FX to Mix - Controls the output level of the internal FX processor to the master buss

8. 7-band EQ - Master section EQ to ne tune the overall sound

9. Rec Out - Line level output using phono connectors, provides connection to recording devices

0. Mix Level - Controls the main master volume

11. Mix output - Balanced / unbalanced ¼” TRS master output

1. Speakon™ outputs - Parallel outputs for connection to

your loudspeakers

PLEASE MAKE SURE THAT THE TOTAL

IMPEDANCE OF THE LOAD IS NOT LESS

THAN 4 OHMS.

2. Power Switch - Turns the unit on or off, ensure that AC

is supplied and that the levels have been turned down

to protect your speakers

3. Phantom Power switch - Activates the +48v phantom

powering for the 4 XLR inputs

4. IEC receptacle - Allows input of the supplied IEC lead

for AC supply

PMX 500 REAR PANEL

. FX Select - Selects the effect type that

will be used

2. Power LED - Indicates AC supply

3. Phantom Power LED - Indicates +48v

phantom powering is supplied to all of

the XLR inputs. Please check that all

connected microphones can withstand

+48v power input

4. FX Send - Allows for master adjustment

of the FX send buss

5. Master Level LED’s - 4 segment LED

metering for the master buss, if the

limit LED illuminates constantly lower

the master level to avoid damage to

your loudspeakers

6. Bypass - Used to switch the internal FX

processor on or off