Instructions

!
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK
WWW.WHARFEDALEPRO.COM
A) Input source selection
and settings.
For DP-N models, the "Set" function in the INPUT section allows
the Analog Input to be used as redundant audio signal.
Note : An appropriate Level and Delay must be used to avoid any audible Level and
timing variation differences when the "Auto" function is enabled. DP-N series only.
Tip! You may right click on an input matrix value to have
text input option.
In the MAIN tab the focus is on the total Gain of each
channel. We must have 35 dB Gain, as we use this to set the
limiters in our preset library. These settings do not recall
with presets and must be manually set.
DP-4035F(N) +18 dB
DP-4065F(N) +16 dB
DP-4100F(N) +14 dB
DP-2200F(N) +11 dB
SEN is automatically re-
calculated
accordingly.
When the EQ’s are linked across different channels there is a
graphical reminder. It becomes a grey/blue colour.
MAIN PAGE
INPUT PAGE
For both DP-N and DP-F models, the 4 x 4 matrix mixer can also
be used.
This allows the same input signal to be used across 4 channels.
This is very useful to SUM in mono any Stereo source or to
manage a different MIX to a different location.
WARNING: do not exceed the maximum +21 dBu input level.
B) Input EQ
8 parametric EQ, HP and LP filters are available.