Instructions

ManualsBrandsWharfedale Pro ManualsDSP ControllerWharfedale Pro DP-N DSP Controller Software v116

DP-N / DP-F Series

DSP Controller Software v116

IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK

WWW.WHARFEDALEPRO.COM

Useful functions explained

Download the DSP Controller software from www.wharfedalepro.com/downloads

Software access

There are 2 permissions levels in DSP controller;

User: Settings and ﬁrmware update option are locked and

grayed out, except main gain control, noise gate and mute

functions.

Factory: All settings are unlocked and accessible

To access ampliﬁer settings, open the menu from the Home

page and click permissions.

Next, click “Factory” and enter the default password:

111111

You may change this password using the option at the

bottom left of the popup

You may also change User level permissions using the “set”

button which is accessible through Factory mode.

FIRMWARE UPDATE

Once in Factory Mode, you may right click an ampliﬁer and

select “Update” to update the ﬁrmware.

Please refer to the instructions included in the v116 DSP

controller download ﬁle. Heed all warnings, and follow

the steps exactly.

IT IS ESSENTIAL TO UPDATE TO LATEST AMPLIFIER

FIRMWARE TO ACCESS BUG FIXES AND SOFTWARE

UPDATE FEATURES

V116 update will show the following number on the front panel ampliﬁer info menu:

FW: 42202B00-002116-3317241024

Version 002116 should be shown in the extended view by clicking the right arrow to expand the window.

Summary of content (4 pages)

PAGE 1
DP-N / DP-F Series DSP Controller Software v116 Useful functions explained Download the DSP Controller software from www.wharfedalepro.com/downloads Software access There are 2 permissions levels in DSP controller; User: Settings and ﬁrmware update option are locked and grayed out, except main gain control, noise gate and mute functions. Factory: All settings are unlocked and accessible To access ampliﬁer settings, open the menu from the Home page and click permissions.
PAGE 2
MAIN PAGE In the MAIN tab the focus is on the total Gain of each channel. We must have 35 dB Gain, as we use this to set the limiters in our preset library. These settings do not recall with presets and must be manually set. DP-4035F(N) +18 dB DP-4065F(N) +16 dB DP-4100F(N) +14 dB DP-2200F(N) +11 dB SEN is automatically calculated accordingly. re- INPUT PAGE A) Input source and settings.
PAGE 3
OUTPUT PAGE In the Output section you have all the settings to optimise your system performance: A) FIR: 512 taps @ 48 KHz FIR ﬁlter from third party software can be loaded. B) EQ: 5 parametric EQ, HP and LP ﬁlters are available. C) Trim: adjustable Gain control up to +18 dB D) Delay: up to 20 ms E) Phase: 180 degrees polarity ﬂip.
PAGE 4
PRESET MANAGER DEVICE PRESET This gives access to save and recall full device presets to either the device (recallable from front panel) or PC (stored as .sd ﬁle) All channel settings will be saved, with the exception of the Main page gain control values, these must be set as instructed on page 2 of this guide. SPEAKER CONFIG This gives access to Save to Library, Copy and Paste a single channel preset. System conﬁguration for….