User guide

DOLBY LABS RECOMMENDED 7.1 PLACEMENT
6
The crossover terminal panel of the CR-30.1 loudspeaker is
providedwith anintegral keyholeslot forwall mounting.
Wall mounting should be carried out by
Before you attempt wall or ceiling mounting, ensure the surface is
stable and strong enough to support the weight of the speaker and
mountinghardware.
Drill one 6mmhole in the wall at a suitable height off the floor. Fix
a suitable No 8 round head screw firmly into each hole using
appropriate wall plugs. Leave a stub of 7mm protruding from the
wall. Align the keyhole slot in the crossover panel over the screw
headand carefullylowerthe unitonto thescrew.
Remove the loudspeakers from the wallready forconnection. After
connectionthey canbere-installedon thewall.
licensed sound contractors
or technicians with appropriate qualifications and experience. All
installation andwiring should comply with the standards laid down
bythe competentauthorityin thecountry andplace of installation.
You will need 1 No.8 screw and matching wall plug to attach each
loudspeakerto the wall. Theseare the responsibility of the installer
whoshould supplysuitablefixings forthis purpose.
CR-30.1 (Detail)
6.0mm
b
c
No 8 x 40mm
7mm
e
d
WALL MOUNTING THE CR-30.1 LOUDSPEAKERS
Left Surround
Left Back
90º
110º
135º
150º
22º
30º
LFE
Centre
Right Back
Right Front
Left Front
Right Surround
(Single back channel
for 6.1sound)