Owner's Manual

Making Connections

The Whammy pedal is extremely easy to set up and use. Follow these steps to get up and running.

1. Connect your instrument to the Whammy’s

Input

Jack

2. Connect from the Whammy’s

Output Jack

to your favorite distortion pedal or to your

ampliﬁer.

3. If using an external MIDI device for control, connect from the MIDI out of the MIDI

device to the Whammy’s

MIDI Input.

4. Connect the included power supply to an AC outlet and the other end to the Whammy’s

Power Input.

5. Turn on your amp and adjust the volume to the desired level.

6. Use the

Eﬀect On/Oﬀ

Footswitch

to enable the eﬀect, push the Expression Pedal fully

forward (toe down), then rotate the

Selector

Knob

to select the desired eﬀect.