Owner's Manual

MIDI Functions

The Whammy features a MIDI input for receiving incoming MIDI data. MIDI messages can select

a Whammy eﬀect and set whether the eﬀect is in an active or bypassed state. MIDI CC messages

can then be used to control the Whammy Expression Pedal position.

MIDI Channel

The Whammy can receive MIDI messages on any, or all MIDI channels. The following steps outline

the procedure for accessing or changing the MIDI channel.

1. Disconnect the power from the Whammy pedal.

2. Press and hold the

Eﬀect On/Oﬀ Footswitch

while reconnecting the power. One of the

Eﬀect LEDs

will begin to ﬂash indicating the currently selected MIDI channel.

3. Using the reference chart below, rotate the

Selector Knob

to select the desired MIDI

channel.

4. Press the

Eﬀect On/Oﬀ Footswitch

again to exit the MIDI set up menu.