User Manual 54inch Fireplace Console

Wood Dowel x 5
Cam Lock x 6
Glue x 1
Glue x 1
AA
AA
CC
CC
UU
UU
Wood Dowel x 2
Wood Dowel x 1
CC
CC
7
7. With the pilot holes as a guide, fasten two corner connectors (PP)
to the joints where the front stretcher (J) meets the side frames
(D and E), using four short screws (DD) per connector.
ASSEMBLY INSTRUCTIONS
Hardware Used
10
10. Align and attach the upper partition panel (H) to the center shelf
(C) with one wood dowel (CC) and two long screws (FF).
Hardware Used
9
9. Align and attach the bottom front molding (K) to the bottom front
stretcher (J) with two wood dowels (CC), two bolts (MM), two
lock washers (NN) and two at washers (OO).
Hardware Used
8
8. Screw two oor levelers (QQ) onto the installed corner
connectors (PP).
Hardware Used
ASSEMBLY INSTRUCTIONS
12
12. Ask for assistance to ip the assembled unit around at its front
edges. Attach two metal brackets (GG) at the joints where the
middle crossbar (L) meets the lower partition panels (F and G)
with four short screws (DD).
11
11a. Glue ve wood dowels (CC) to the top inner holes of both side
frames (D and E) and the upper partition panel (H).
11b. Ask for assistance to position the top panel (A) onto the inserted
wood dowels (CC) and attach it into place by engaging six cam
locks (AA).
The molding faces front of the unit
Hardware Used
Hardware Used
98
Corner Connector x 2
M3.5 x 15 mm Screw x 8
DD
PP
Flat Washer x 2
Lock Washer x 2
Floor Leveler x 2
2” Bolt x 2
MM
NN
OO
D
D
D
E
J
DD
PP
PP
CC
DD
GG
NN
OO
CC
MM
QQ
QQ
H
C
A
H
F
FF
J
K
M4 x 50 mm Screw x 2
M3.5 x 15 mm Screw x 4
Metal Bracket x 2
QQ
FF
G
L
GG
DD