User Manual 54inch Fireplace Console
1
1a. Unpack the unit and conrm that you have all the hardware and
required parts. Assemble the unit on a carpeted oor or the empty
carton to avoid any scratch.
1b. Securely screw 31 cam bolts (BB) into the designated small holes
on the top panel (A), bottom panel (B) and center shelf (C). Fully
tighten with a Phillips screwdriver.
ASSEMBLY INSTRUCTIONS
Hardware Used
Cam Bolt x 31
BB
4
4. Glue four wood dowels (CC) into the bottom inner holes of
both lower partition panels (F and G) and attach them to the
bottom panel (B) with four long screws (FF).
Hardware Used
3
3. Glue four wood dowels (CC) into the top inner holes of both
partition panels (F and G) and attach them to the center shelf
(C) with four cam locks (AA).
Hardware Used
Wood Dowel x 2
Wood Dowel x 4
Cam Lock x 3
Cam Lock x 4
Glue x 1
Glue x 1
2
2. Glue two wood dowels (CC) into the inner holes of middle
crossbar (L) and attach it to the center shelf (C) by engaging
three cam locks (AA).
A
B
C
D
C
C
L
E
B
E
D
Hardware Used
AA
AA
CC
CC
UU
UU
ASSEMBLY INSTRUCTIONS
6
6a. Glue ten wood dowels (CC) into the inner holes of the previous
assembly at both ends.
6b. Align the large holes on both side frames (D and E) with the
inserted wood dowels and press them together. Attach the side
frames (D and E) in place by engaging ten cam locks (AA).
5
Hardware Used
Hardware Used
76
BB
G
F
I
I
AA
AA
AA
FF
CC
CC
CC
CC
Wood Dowel x 4
Long Screw x 4
Glue x 1
FF
CC
UU
J
Wood Dowel x 6
Wood Dowel x 10
Cam Lock x 8
Raw edge
The stiles
face inward
The cam locks
face inward
Cam Lock x 10
Glue x 1
Glue x 1
AA
AA
CC
CC
UU
UU
CC
AA
G
F
B
B
C
5. Glue six wood dowels(CC) into the inner holes of the bottom
stretchers (I and J) and attach them to the bottom panel (B)
by engaging eight cam locks (AA).