User Manual 54inch Fireplace Console

TABLE OF CONTENTS

Wood Dowel Installation...................................................................................................... 2

Package Contents............................................................................................................... 3

Hardware Contents..............................................................................................................4

Safety Information............................................................................................................... 5

Preparation ......................................................................................................................... 5

Assembly Instructions.......................................................................................................... 6

Care and Maintenance ......................................................................................................13

One-Year Warranty ........................................................................................................... 13

Replacement Parts List ..................................................................................................... 14

WOOD DOWEL INSTALLATION

1. Apply glue to each dowel prior to inserting the dowel into the hole. Excess glue can be wiped o

with damp cloth.

2. Insert dowel at least half way by tapping lightly with a rubber mallet if necessary.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Top Panel 1

B Bottom Panel 1

C Center Shelf 1

D Left Side Frame 1

E Right Side Frame 1

F Left Partition Panel 1

G Right Partition Panel 1

H Upper Partition Panel 1

I Bottom Back Stretcher 1

J Bottom Front Stretcher 1

PART DESCRIPTION QUANTITY

K Bottom Front Molding 1

L Middle Crossbar 1

M Adjustable Shelf 2

N Left Door 1

O Right Door 1

P Door Glass 2

Q Upper Back Panel 1

R Lower Back Panel 2

S Wood Door Panel (pre-attached) 2

Fireplace Insert 1

Remote Control with Battery 1

CAM LOCK SYSTEM OPERATION

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making

sure Cam Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face

of Cam Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.