User Manual 54inch Fireplace Console

ManualsBrandsWhalen ManualsElectric Fireplaces54-in W Madison Snow Ash Infrared Quartz Electric Fireplace

Serial Number Purchase Date

Please call for replacement parts or assistance: 1-866-942-5362

Pacic Standard Time: 8:30 a.m. – 4:30 p.m., PST, Monday to Friday

Or visit our web site: www.whalenfurniture.com

ATTACH YOUR RECEIPT HERE

ITEM # 1031287

MODEL # WSLWFP54-6

Español p. 15

54 in. Media Console Infrared Electric Fireplace

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-942-5362,

8:30 a.m. - 4:30 p.m., PST, Monday - Friday.

Printed in China

PART DESCRIPTION PART#

A Top Panel *WSLWFP54-6-01-TP

B Bottom Panel *WSLWFP54-6-02-BP

C Center Shelf *WSLWFP54-6-03-CS

D Left Side Frame *WSLWFP54-6-04-LSF

E Right Side Frame *WSLWFP54-6-05-RSF

F Left Partition Panel *WSLWFP54-6-06-LPP

G Right Partition Panel *WSLWFP54-6-07-RPP

H Upper Partition Panel *WSLWFP54-6-08-UPP

I Bottom Back Stretcher *WSLWFP54-6-09-BBS

J Bottom Front Stretcher *WSLWFP54-6-10-BFS

K Bottom Front Molding *WSLWFP54-6-11-BFM

L Middle Crossbar *WSLWFP54-6-12-MC

M Adjustable Shelf *WSLWFP54-6-13-AS

N Left Door *WSLWFP54-6-14-LD

O Right Door *WSLWFP54-6-15-RD

P Door Glass *WSLWFP54-6-16-DG

Q Upper Back Panel *WSLWFP54-6-17-UBP

R Lower Back Panel *WSLWFP54-6-18-LBP

S Wood Door Panel *WSLWFP54-6-19-WDP

Door Hinge with Screws *WSLWFP54-6-20-DHS

Complete Hardware *WSLWFP54-6-CH

Complete Fireplace Inert *SF127-26AI2D-CFI

Remote Control 6-Buttom *SF127-26AI2D-RC6B

On-line Video Instruction Guides

Go to www.guides.sellpoints.com to view step-by-step instructional videos for

operating the replace. Enter the following product number on the website.

WSLWFP54-6

Summary of content (14 pages)

PAGE 1
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-942-5362, 8:30 a.m. - 4:30 p.m., PST, Monday - Friday.
PAGE 2
TABLE OF CONTENTS PACKAGE CONTENTS Wood Dowel Installation...................................................................................................... 2 Package Contents............................................................................................................... 3 A Hardware Contents..............................................................................................................4 Safety Information..................................................................
PAGE 3
SAFETY INFORMATION HARDWARE CONTENTS (shown actual size) BB AA DD CC Cam Lock Com Bolt Qty. 31+1 extra Qty. 31+1 extra M8 x 30 mm Wood Dowel M3.5 x 15 mm Screw M3.5 x 15 mm Washer Head Screw Qty. 34+1 extra Qty. 12+1 extra Qty. 34+1 extra II GG HH Metal Bracket Cam Lock Cover Shelf Pin Qty. 2 Qty. 18+1 extra Qty. 8+1 extra FF M4 x 50 mm Screw EE Qty. 6+1 extra KK LL MM Handle Handle Bolt L-shaped Metal Brace 1/4” x 2” Bolt Qty. 2 Qty. 4 Qty. 2 Qty.
PAGE 4
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1a. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 1b. Securely screw 31 cam bolts (BB) into the designated small holes on the top panel (A), bottom panel (B) and center shelf (C). Fully tighten with a Phillips screwdriver. 1 4.
PAGE 5
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 7. With the pilot holes as a guide, fasten two corner connectors (PP) to the joints where the front stretcher (J) meets the side frames (D and E), using four short screws (DD) per connector. 10. Align and attach the upper partition panel (H) to the center shelf (C) with one wood dowel (CC) and two long screws (FF). 7 E J DD PP M3.5 x 15 mm Screw x8 Corner Connector x2 D 8. Screw two floor levelers (QQ) onto the installed corner connectors (PP).
PAGE 6
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 13a. Pick up the upper back panel (Q) and align the drilled holes with the pilot holes on the back of the top panel (A). Attach the upper back panel (Q) in place with the provided washer head screws (EE). 13b. Align and attach two lower back panels (R) to the side frames (D and E) and lower partition panels (F and G) with the provided washer head screws (EE), using the plots holes as a guide.
PAGE 7
ASSEMBLY INSTRUCTIONS CARE AND MAINTENANCE 19. Using the pilot holes as a guide, align and attach L-shaped metal braces (LL) to the bottom panel (B) by screwing one washer head screw (EE) in each. 19 EE Hardware Used EE Washer Head Screw x2 LL L-shaped Metal Brace x2 LL B The rubber bumper is against the firebox 20a. Remove the paper backing from acrylic stopper (SS), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the front of the top panel (A).
PAGE 8
REEMPLAZO DE LAS PIEZAS Para piezas de repuesto, llame a nuestro departamento de servicio al cliente al 1-866-942-5362, de 8:30 a.m. - 4:30 p.m., PST, Lunes – Viernes.
PAGE 9
TABLA DE CONTENIDO CONTENIDO DEL PAQUETE Instalación de clavija de madera...................................................................................... 16 Contenidos del empaque.................................................................................................. 17 A Contenidos de atículos de ferretería................................................................................. 18 Información de seguridad..........................................................................
PAGE 10
INFORMACIÓN DE SEGURIDAD CONTENIDO DE HERRAJE (mostrado tamaño real) BB AA Cant. 31+1 extra Cant. 34+1 extra Cant. 34+1 extra Cant. 12+1 extra GG FF EE Tornillo de cabeza Tornillo de M3.5 x 15 mm arandela M3.5 x 15 mm Perno M8 x 30 mm de madera Tuerca de fijación Tornillo de fijación Cant. 31+1 extra DD CC II HH Por favor lea y comprenda el manual entero antes de intentar ensamblar o instalar el producto. • No permita que los niños se suban o jueguen en o alrededor de este producto.
PAGE 11
INSTRUCCIONES DE ENSAMBLE INSTRUCCIONES DE ENSAMBLE 1a. Desempacar la unidad y confirmar que se tiene todo el herraje y partes requeridas. Ensamble la unidad sobre un área con alfombra o sobre el cartón para evitar daños a las piezas. 1b. Atornille 31 tornillos de fijación (BB) en los orificios pequeños designados en el panel superior (A), el panel inferior (B) y el repisa central (C) como se muestra. Ajústelos correctamente con un destornillador estrella. 1 4.
PAGE 12
INSTRUCCIONES DE ENSAMBLE INSTRUCCIONES DE ENSAMBLE 10. Alinear y adjuntar el panel divisorio superior (H) a la repisa central (C) con una clavija de madera (CC) y dos tornillos largos (FF). 7 7. Con los agujeros piloto como guía, ajuste dos connectores esquina (PP) en la junta donde la soporte frontal inferior (J) se encuentra con los marcos laterales (D y E), usando cuatro tornillos cortos (DD) por conector. E J Herraje Utilizado PP x8 Conector esquina x2 8.
PAGE 13
INSTRUCCIONES DE ENSAMBLE INSTRUCCIONES DE ENSAMBLE 13a. Recoger el panel posterior superior (Q) y alinear los agujeros perforados con los agujeros piloto sobre el parte posterior del panel superior (A). Fije el panel posterior superior (Q) en su lugar con los tornillos de cabeza arandela (EE). 13b.
PAGE 14
INSTRUCCIONES DE ENSAMBLE CUIDADO Y MANTENIMIENTO 19. Usar los agujeros piloto como una guía, alinear y colocar abrazaderas de metal en forma de L (LL) al panel inferior (B) fijando con un tornillo de cabeza arandela (EE) en cada uno. 19 EE Herraje Utilizado EE x2 Tornillo de cabeza de arandela LL x2 LL Abrazadera metal en forma de L El tope de goma queda contra el inserto de chimenea 20a.