Technical Specifications

ManualsBrandsWhalen ManualsElectric Fireplaces48" Farmstead Electric Fireplace Entertainment Center in Laminate Dark Pine

THANK YOU

We appreciate the trust and confidence you have placed in Whalen Furniture through the purchase of this electric

fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full

line of products available for your home improvement needs. Thank you for choosing Whalen Furniture!

Date: 2017-06-21 Rev 0001-A Factory: ZHOSUM

USE AND CARE GUIDE

COMBINATION ELECTRIC FIREPLACE/HEATER

Model #SF103C-23G

If you have any questions regarding the use of this unit, or find that your fireplace/heater unit needs service, please

do not return the unit to the store where you purchased it. Instead, please contact our Customer Service Department

and have your instructions and parts list ready to provide the model name, part name, or factory number.

Whalen Customer Service

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our website

www.whalenfurniture.com / www.whalenstyle.com

Or e-mail your request to:

parts@whalenfurniture.com

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

LOT NUMBER:

DATE PURCHASED: / /

Summary of content (10 pages)

PAGE 1
LOT NUMBER: DATE PURCHASED: / / USE AND CARE GUIDE COMBINATION ELECTRIC FIREPLACE/HEATER Model #SF103C-23G If you have any questions regarding the use of this unit, or find that your fireplace/heater unit needs service, please do not return the unit to the store where you purchased it. Instead, please contact our Customer Service Department and have your instructions and parts list ready to provide the model name, part name, or factory number.
PAGE 2
Table of Contents Table of Contents ............................................................... 2 Safety Information .............................................................. 2 Important Safety Information .....................................................2 Save These Instructions ............................................................2 Safety Information (continued) ............................................. 3 Grounding Instructions ......................................................
PAGE 3
Safety Information (continued) GROUNDING INSTRUCTIONS FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
Pre-installation ELECTRICAL SPECIFICATIONS □ □ Voltage: 120 VAC, 60 Hz Watts: 1400 Watts TOOLS REQUIRED Phillips screwdriver (not provided) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. 18 Part 18 Description Screw Quantity 12 + 3 extra PACKAGE CONTENTS X Y V Y W Part Description Quantity V Remote Control with Battery 1 W Fireplace Insert 1 X Top Trim 1 Y Side Trim 2 This insert has front panel made of GLASS! ALWAYS use extreme caution when handling glass.
PAGE 5
Assembly 1 □ □ Attaching the metal trims Fasten the top trim (X) to the top of the fireplace insert (W) with two screws (18). Make sure that the right angle side points towards the front of the unit. Align and attach two side trims (Y) to both sides of the fireplace insert (W) respectively with the right angle side facing the front of the unit, using two screws (18) per trim.
PAGE 6
Operation 3 Identifying the control panel 4 Understanding the function indicator □ The control panel is located on the top right corner of the fireplace/heater unit. □ The control panel contains the display unit (1), function indicator (2), timer function (3), heater control (4), flames control (5), and main power (6). □ The display unit (1) displays information about the flame level, timer, and current temperature. □ The function indicator (2) has three square LEDs – red, green, and blue.
PAGE 7
Operation (continued) 6 Using the heater control □ The heater button (4) turns the heater on or off. There is no speed setting for the heater blower. If you put the heater in a standby mode (turn off by the main power button 6), the unit will hold the settings in the memory. When the power is turned back on, the heater will turn on at the same settings. □ When the heating function turns on, press and hold the heater button (4) for five seconds to enter temperature adjustment mode.
PAGE 8
Operation (continued) 6 Using the main power button □ 7 Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press again to turn the unit off. □ 6 Using Demo mode Press the switch at the back of the fireplace to set the heater to Demo Mode. It will eliminate the ability for the heater to be turned on when the rocker switch is set at “I” position.
PAGE 9
Using the Remote Control (continued) WARNING: Do not ingest batteries. 1. Non-rechargeable batteries are not to be recharged. 2. Batteries are to be inserted with the correct polarity. 3. Exhausted batteries are to be removed from the product. 4. Always purchase the correct size and grade of battery most suitable for the intended use. 5. Replace all batteries of a set at the same time. 6. Clean the battery contacts and also those of the device prior to battery installation. 7.
PAGE 10
Troubleshooting Problem Solution The unit does not turn on. Check that the unit is plugged into a standard 120V outlet. Press the power button on the control panel. The main power switch lights up, but there is no flame effect. Open the top and back panel to check if the flame spindle has fallen off from the spindle motor. There is a visible flame effect, but the heater does not blow warm air. Confirm that the temperature setting exceeds the room temperature.