LOT NUMBER: DATE PURCHASED: / / Farmstead 48" Fireplace Console Model # WSF48FM23R-AO # WSF48FM23R-PD ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m.
MAXIMUM RECOMMENDED WEIGHT LOADS MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Farmstead 48" Fireplace Console MODEL # WSF48FM23R-AO / WSF48FM23R-PD MADE IN CHINA FITS UP TO MOST 60” FLAT PANEL TVs MAXIMUM LOAD 61.3 kg / 135 lb. PLACE TV BEHIND THE STOPPER MAXIMUM LOAD 22.7 kg / 50 lb. THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.
IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and nonabrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH A DAMP CLOTH. Insert Dowel at least half way by tapping lightly with a rubber mallet (not included), IF NECESSARY. 1 2 3 X 4 X CAM LOCK SYSTEM OPERATION HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS 1.
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) B- Left Side Panel (Qty. 1) D- Center Shelf (Qty. 1) E- Bottom Panel (Qty. 1) G- Left Lower Partition Panel (Qty. 1) J- Center Shelf Molding (Qty. 1) M- Right Middle Stile (Qty. 1) P- Upper Back Panel (Qty. 1) C- Right Side Panel (Qty. 1) F- Upper Partition Panel (Qty. 1) H- Right Lower Side Panel (Qty.
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. S- Right Door (Qty. 1) Fireplace Insert (Qty. 1) (1) Cam Lock (Qty. 42+2 extra) (2) Cam Bolt (Qty. 42+2 extra) (4) Small Wood Dowel (Qty. 3+1 extra) (3) Large Wood Dowel (Qty. 41+2 extra) (5) M4 x 25 mm Screw (Qty. 4+1 extra) (7) M3.5 x 12 mm Flat Head Screw (Qty. 4+1 extra) (10) Handle and Back Plate (Qty. 2) (13) Rubber Bumper (Qty.
Assembly Instructions 2 A E J 1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), the Bottom Panel (E) and the Center Shelf Molding (J) using a Phillips screwdriver. D C M B 2 L 3.
Assembly Instructions 5 5 I 5 4 5 4 4 A 4. Insert three Wood Dowels (4) into the large holes on the front edge of Top Panel (A). Tap in with a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels. 5. Align the drilled holes on the Top Front Stretcher (I) with the inserted Wood Dowels (4) on the Top Panel (A), and then press them together. Secure the Top Front Stretcher (I) in place with four 25 mm Screws (5) using a Phillips screwdriver.
Assembly Instructions 1 K 3 D 7. Attach the Middle Crossbar (K) to the Center Shelf (D) with two Large Wood Dowels (3) and two Cam Locks (1) as shown. L 3 G M H 1 8. Attach the Left Middle Stile (L) to the Left Lower Partition Panel (G) with two Large Wood Dowels (3) and two Cam Locks (1). 9. Repeat the same procedure to combine the Right Middle Stile (M) with the Right Lower Partition Panel (H).
Assembly Instructions 1 N N 3 E 10. Attach two Bottom Stretchers (N) to the Bottom Panel (E) with six Large Wood Dowels (3) and eight Cam Locks (1). D 3 H G 1 11. Attach the Lower Partition Panels (G and H) to the Center Shelf (D) with four Large Wood Dowels (3) and four Cam Locks (1).
Assembly Instructions H 3 6 G E 3 6 6 6 12. Attach the Bottom Panel assembly to the Lower Partition Panels (G and H) with four Large Wood Dowels (3) and four 50 mm Screws (6). C D N E 3 N B 1 3 1 13. Align and attach the Left Side Panel (B) to the previous assembly with six Large Wood Dowels (3) and six Cam Locks (1). 14. Repeat the same procedure to attach the Right Side Panel (C) at the opposite end.
Assembly Instructions 2 D 15. Ask for assistance to stand the assembled unit upright. 16. Securely screw two Cam Bolts (2) into the designated small holes on the Center Shelf (D) using a Phillips screwdriver. F 1 3 D 17. Attach the Upper Partition Panel (F) to the Center Shelf (D) with one Large Wood Dowel (3) and two Cam Locks (1).
Assembly Instructions A 3 F C B 1 18. Attach the Top Panel (A) to the Side Panels (B and C) and Upper Partition Panel (F) with five Large Wood Dowels (3) and six Cam Locks (1). 7 9 L K M 19. Flip the previous assembly around at its front edges. 20. With the pilot holes as a guide, fasten two Straight Metal Brackets (9) at the joints where Middle Crossbar (K) met the Middle Stiles (L and M), using two 12 mm Flat Head Screws (7) per bracket.
Assembly Instructions 8 P D H Q E C 21. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight and there are no gaps between the parts. This will help keep the unit square. 22. Pick up the Upper Back Panel (P) and align the pre-drilled holes against the upper long edge with the pilot holes on the back of the Top Panel (A). Attach the Back Panel (P) in place using the provided Washer Head Screws (8).
Assembly Instructions B C S R 1 25. Stand the unit upright. 26. Pick up the Left Door (R) and attach the extended Hinge Arms to the Hinge Bases installed on Left Side Panel (B). Loosen the bolt on the back of Hinge Base for an easy fit. Align and insert the “U” slot on Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both door hinges engage and function properly. Tighten the bolt on the Hinge Base to lock the hinges in place. 27.
Assembly Instructions 16 F 13 C B H Q S R 13 15 30. Stick the Rubber Bumpers (13) at the outer corners of the Doors (R and S) where they met the Middle Stiles (L and M). 31. Plug the Cam Lock Caps (16) onto the visible Cams Locks included on the Side Panels (B and C) to conceal the Cams. 32. Plug the Cam Lock Covers (15) onto the visible Cams Locks to conceal the Cams. E 33.
Assembly Instructions NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the console. 36. Remove the paper backing from the Acrylic Stopper (14), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the Top Panel (A). Press down on the acrylic stopper to help adhesion. 37. At the back of Top Panel (A), carefully unscrew two thumb tacks to remove the acrylic stopper template.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.
