Assembly Instructions

12. Using the pilot holes as a guide, fasten two Hooks (12) to the upper corners of the Barrister Door (L)

with four 12 mm Screws (6) as shown.

13. Attach one Knob (8) to the front side of the Barrister Door (L) with one Knob Bolt (10).

NOTE: The Barrister Door is shipped with the Glass Door Panel (M). You can keep the door as it is or

interchange with Speaker Grill (N) or Wood Door Insert (O) depending on your configuration.

14. To change the configuration, loosen the screws on the inside of the Barrister Door (L) and rotate the

clips to remove the panel. Replace with the desired panel, then rotate clips to secure the panel within the

door frame and tighten screws.