Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Glue two Wood Dowels (5) into the inner holes on one Lower Side Panel (F) and attach it to the Left

Front Panel (G) with two 1-1/4” Bolts (2) and two Washers (3 and 4).

3. Repeat the same procedure to combine the other Lower Side Panel (F) with the Right Front Panel (H)

together.

4. Using the pilot holes as a guide, attach two Small Metal Brackets (9) to the Center Crossbar (I) with two

12 mm Screws (6) as shown.