Assembly Instructions

18. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are

tight and there are no gaps between the parts. This will help keep the unit square.

19. Pick up the Back Panel (P) and align the pre-drilled holes against the upper long edge with the pilot

holes on the back stretcher of the Top Panel (A). Attach the Back Panel (P) in place with the provided

Washer Head Screws (7).

20. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO

NOT drag the insert across the Base (J) as it may scratch the unit.