LOT NUMBER: DATE PURCHASED: / / Leland 42" Fireplace Console Model # WSF42OW23D # WSF42OW23W ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday Or visit our website www.
MAXIMUM RECOMMENDED WEIGHT LOADS MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Leland 42" Fireplace Console MODEL #: WSF42OW23D/WSF42OW23W MADE IN CHINA FITS UP TO MOST 50” FLAT PANEL TVs MAXIMUM LOAD 61.2 kg / 135 lb. PLACE TV BEHIND THE STOPPER MAXIMUM LOAD 22.7 kg / 50 lb. THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT.
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) D- Upper Right Side Frame (Qty. 1) G- Left Front Panel (Qty. 1) J- Base (Qty. 1) M- Glass Door Panel (Qty. 1) (Pre-attached) B- Top Corner Extension (Qty. 1) C- Upper Left Side Frame (Qty. 1) E- Center Shelf (Qty. 1) F- Lower Side Panel (Qty. 2) H- Right Front Panel (Qty. 1) I- Center Crossbar (Qty.
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. P- Back Panel (Qty. 1) Fireplace Insert (Qty. 1) (1) Ø1/4” x 5/8” Bolt (Qty. 10+1 extra) (2) Ø1/4” x 1-1/4” Bolt (Qty. 26+1 extra) (5) M8 x 30 mm Wood Dowel (Qty. 42+2 extra) (4) Flat Washer (Qty. 26+1 extra) (7) Ø3.5 x 15 mm Washer Head Screw (Qty. 20+1 extra) (10) Knob Bolt (Qty. 1) (8) Knob (Qty. 1) (14) Connector (Qty.
Assembly Instructions 5 H G F F 2 34 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Glue two Wood Dowels (5) into the inner holes on one Lower Side Panel (F) and attach it to the Left Front Panel (G) with two 1-1/4” Bolts (2) and two Washers (3 and 4). 3. Repeat the same procedure to combine the other Lower Side Panel (F) with the Right Front Panel (H) together. 6 9 6 9 I 4.
Assembly Instructions 5 I 5 G F H F I H G 9 F F 6 5. Glue four Wood Dowels (5) into the drilled holes on the Center Crossbar (I) at both ends and attach it between the Left and Right Front Panels (G and H) as shown. Insert two 12 mm Screws (6) through the Small Metal Brackets (9) and screw into the Front Panels (G and H). E 5 I G F 4 3 H 2 F 6. Glue ten Wood Dowels (5) into the top holes of the previous assembly. 7.
Assembly Instructions 2 E G F H F 3 4 5 J 8. Glue eight Wood Dowels (5) into the non-threaded holes on the Base (J). 9. Position the previous assembly onto the inserted Wood Dowels (5) on the Base (J) and attach in place with six 1-1/4” Bolts (2) and six Washers (3 and 4). C D 2 3 4 E G F H F 10. Glue six Wood Dowels (5) into the non-threaded holes on the Center Shelf (E). 11.
Assembly Instructions 6 12 10 6 L 12 8 12. Using the pilot holes as a guide, fasten two Hooks (12) to the upper corners of the Barrister Door (L) with four 12 mm Screws (6) as shown. 13. Attach one Knob (8) to the front side of the Barrister Door (L) with one Knob Bolt (10). N M L O NOTE: The Barrister Door is shipped with the Glass Door Panel (M). You can keep the door as it is or interchange with Speaker Grill (N) or Wood Door Insert (O) depending on your configuration. 14.
Assembly Instructions L L C 12 C/D D 15. Hook the Barrister Door (L) onto the pre-attached plastic slides on the Upper Side Frames (C and D). A 5 C D 4 3 2 16. Glue six Wood Dowels (5) into the top holes on the Upper Side Frames (C and D). 17. Position the Top Panel (A) onto the inserted Wood Dowels (5) and fasten in place with four 1-1/4” Bolts (2) and four Washers (3 and 4).
Assembly Instructions A D P 7 7 18. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight and there are no gaps between the parts. This will help keep the unit square. 19. Pick up the Back Panel (P) and align the pre-drilled holes against the upper long edge with the pilot holes on the back stretcher of the Top Panel (A). Attach the Back Panel (P) in place with the provided Washer Head Screws (7). I 20.
Assembly Instructions I 7 13 7 21. Using the pilot holes as a guide, fit four Large Metal Brackets (13) to the side plates of the fireplace insert and fasten in place with eight 15 mm Washer Head Screws (7). 1 14 1 21mm 14 27mm 1 14 K 1 14 27mm 21mm 22. Fasten two Plastic Connectors (14) to both ends of Corner Supports (K) with two 5/8” Bolts (1) as shown.
Assembly Instructions 1 1 14 21mm 14 1 27mm 14 1 14 B 23. Attach three Plastic Connectors (14) to the Top Corner Extension (B) with three 5/8” Bolts (1) as shown. K 1 14 B 24. Attach the long end of the Corner Support (K) to the Top Corner Extension (B) with one 5/8” Bolt (1).
Assembly Instructions A 1 B 5 I J K 14 1 25. Glue four Wood Dowels (5) into the drilled holes on the back edge of the Top Panel (A). Attach the assembled Corner Extension to the Top Panel (A) and the Base (J) with four 5/8” Bolts (1). B A A B I NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the console. 26.
Assembly Instructions Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet. 28. Ask for assistance to position the assembled fireplace at the desired location against a wall. If necessary, adjust the pre-attached Floor Levelers at the bottom of the Base (J) to level the unit. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraints to the unit and the wall.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.
