Use And Care Manual

5
Operation
1
Identifying the control panel
2
Understanding the function indicator
□
The control panel is located o
n the top left corner of the
fireplace/heater unit.
□ The control panel contains the display unit (1), function
indicator (2), timer function (3), heater control (4), flames
control (5), and main power (6).
□ The display unit (1) displays information about the flame level,
timer, and current temperature.
□
The
f
unction
i
ndicator
(2)
has three square LED
s
–
red
,
g
reen
,
and blue. The red LED indicates that the Fahrenheit temperature
heating function is running, the green LED indicates that the
Celsius temperature heating function is running, and the blue
LED indicates that the timer function is engaged.
□ To the right of the three LEDs, is the infrared receiver module
which communicates with the remote control to control the
heater.
3
Using the timer function
□
The timer button (3) allows you to set the amount of time you want the fireplace/heater to run. The timer button (3)
operates both the
flames and the heater function. If the heater is operating when the timer is set, then the heater is on the timer. If the flames are operating,
then the timer will control the flames. If both the heater and flames are operating with the timer set, then the timer controls both the
flames and the heater. Pressing the button in sequence will set the timer for a set interval. This interval period is shown in the display (1),
in blue. The set intervals are displayed in this table. The timer interval is set from the time the interval is selected. There is no clock
function for turning the heater or flames on or off at a specific time.
Button Press
Timer Interval
Display
1st press
30 Minutes
30
2nd press
1 Hour
1h
3rd press
2 Hours
2h
4th
press
3 Hours
3h
5th press
4 Hours
4h
6th press
5 Hours
5h
7th press
6 Hours
6h
8th press
OFF
None
1
2
3
4
5
6
2
1
3