Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Fixed Shelf (D)

and Bottom Panel (E) using a Phillips screwdriver.

3. Glue three Wood Dowels (3) into the inner holes on Left Bottom Molding (L) and fasten it to the Left

Side Panel (B) with six 38 mm Screws (6).

4. Repeat the previous step to combine the Right Bottom Molding (M) with the Right Side Panel (C)

together.