Installation Instructions

Assembly Instructions
4. Position assembled Shelf (1) between the two companion cabinets making sure the back edges are even with
each other. Ask for assistance to hold the shelf at your desired height. Securely attach the Shelf in place by
inserting the M8 x 25 mm Screws (E) through the countersunk holes on the Stringers (3 & 4).
5. Attach Pole Holder (D) to the Stringer Right (4) using two M6 x 13 mm Screws (F). Make sure the opening of
Pole Holder facing up as shown below.
6. Repeat last step to attach other Rod Holder (D) to Stringer Left (3).
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Storage Factory No.: 15294 Page #6 of 7