Installation Instructions

Assembly Instructions
1. Fully insert M8 x 30 mm Dowels (C) into the middle holes of Stringers Left & Right (3 & 4). Tap in with a
rubber mallet if necessary. Screw 4 Cam bolts (B) all the way into the outside holes pre-drilled on the Long
Shelf (1).
2. Using Dowels as a guide, attach Stringers Left & Right (3 & 4) to Long Shelf (A) by engaging 4 Cam Locks
(A). Make sure the Cam Locks facing outward.
3. Carefully position the combined Hutch and Base units at desired location. Make sure they are in line and
spaced approximately 35-3/4 inches apart for shelf clearance.
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Storage Factory No.: 15294 Page #5 of 7