Manual

6
Construction
* metalfi lm resistor !
This educational LCD oscilloscope consists of three parts: the base PCB, the display PCB and the rear panel. First we assemble the
display pcb and then the base PCB. On the display module we mount components on both sides. We start at the solderside and fi nish
with the components on the component side.
 R1 : 220Ω (2 - 2 - 1 - B)
 R2 : 560Ω (5 - 6 - 1 - B)
 R3 : 1KΩ (1 - 0 - 2 - B)
 R4 : 1K1 (1 - 1 - 0 - 1 - 1)
*
 R5 : 2K4 (2 - 4 - 0 - 1 - 1)
*
 R6 : 10KΩ (1 - 0 - 3 - B)
1 Vertical resistors
Display PCB
R...
Solderside
2 Ceramic Capacitors
 C1 : 1µF (105)
 C2 : 1µF (105)
 C3 : 1µF (105)
 C4 : 1µF (105)
 C5 : 1µF (105)
 C6 : 1µF (105)
 C7 : 1µF (105)
 C8 : 1µF (105)
 C9 : 1µF (105)
 C10 : 1µF (105)
3 Female header
 SK1 : 18pins
1 Push buttons
 SW1
 SW2
 SW3
 SW4
 SW5
 SW6
2 LCD
Component
Side
Be careful when soldering the LCD
connections. Overheating will damage
the LCD screen.
Be careful when soldering the LCD
connections. Overheating will damage
!
Construction
Bend the ceramic
capacitors