Instructions

7
7. Once the correct weight is showing, type in the d character (1) and press send (2) to indicate
that the calibration process has finished. Select and copy the resulting #define statements
containing the calibration parameters (3).
8. Open the read_weight.ino sketch, and paste the copied #define statements in lines 32 and 33:
9. Upload the read_weight.ino sketch, and open the serial monitor by clicking the serial
monitor button , make sure the baudrate is set at 9600 baud.
The module will now be initialized with the new calibration factors, after which both averaged
and single weight measurements will be shown in the serial monitor.