Instructions

5
Example program
1. Use the Arduino Library manager to install the RevEng PAJ7620 library, by going to Sketch
> Include Library > Manage Libraries… , typing in paj7620 in the search bar, selecting the
correct library, and clicking “Install”:
2. Open the paj7620_9_gestures example sketch from the library you installed by going to
File > Examples > RevEng PAJ7629 > paj7620_9_gestures
3. Connect your Arduino compatible board, make sure the correct Board and connection port
are set in the tools menu, and hit Upload
4. Open the serial monitor by clicking the serial monitor button , make sure the baudrate is
set at 115200 baud. Try some gestures out in front of the sensor and they should appear on
the serial monitor!