MANUAL EN GESTURE RECOGNITION SENSOR MODULE WPSE358 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview This sensor is able to detect 9 distinct gestures like up, down, forward, backward, rotating, ... to use as an input for your project. Check out all gesture possibilities in the features below. The module interfaces to your development board (e.g. Arduino® compatible board) using I²C and is able to detect and report various gestures including moving up, down, left, right, forward, backwards, rotating clockwise and anti-clockwise, and waving.
Example program 1. Use the Arduino Library manager to install the RevEng PAJ7620 library, by going to Sketch > Include Library > Manage Libraries… , typing in paj7620 in the search bar, selecting the correct library, and clicking “Install”: 2. Open the paj7620_9_gestures example sketch from the library you installed by going to File > Examples > RevEng PAJ7629 > paj7620_9_gestures 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPSE358 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
