MANUAL EN CURRENT MEASURING SENSOR WPSE355 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview This module measures AC currents of up to 5 A in a contactless method! It has a simple analog voltage signal as an output interface and has a current to voltage conversion factor of 0,4 V / A. Its working frequency range is 20 Hz to 20 kHz and it has a dielectric strength of 600 V AC / 1min.
Example program You can download the example Arduino® program by going to the official Whadda github page: github.com/WhaddaMakers/Current-measuring-sensor 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code_wpse355 folder. Open the example Arduino® sketch (WPSE355_example.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPSE355 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
