MANUAL EN MICRO PIR MOTION SENSOR MODULE WPSE353 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview This Whadda module uses a PIR (Pyroelectric InfraRed) motion sensor to detect infrared signals from a moving person or moving animal. The module sends out a simple HIGH logic level signal for 2-3 seconds when it has detected motion. Specifications: Supply voltage: 3.3 – 5 V Operating current: 15 μA Output signal voltage: High 3 V, Low 0 V Detection Angle: 100° Detection Distance: 3-4 meters Weight: 4 g Dimensions (W x L x H): 34.4 x 20.0 x 12.
Example program You can download the example Arduino® program by going to the official Whadda github page: github.com/WhaddaMakers/Micro-PIR-motion-sensor 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code folder. Open the example Arduino® sketch (example_code.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPSE353 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
