User Manual

3
Product overview
The Whadda MG995 servo motor is a high-speed, metal gear servo motor . It can be used with most
standard RC receivers, or with your own hardware that can output the required PWM signals such as an
Arduino® compatible board. The servo comes with all of the required mounting hardware and a
selection of arms suitable for a variety of applications.
Specifications:
Supply voltage: 4,8 – 7,2 V DC
Stall torque: 83,4 N · cm (@ 4,8 V), 98,1 N · cm (@ 6 V)
Operating speed : 0.2 s/60° (@ 4.8 V), 0.16 s/60° (@ 6 V)
Rotation angle range: 0 – 120 °
Dead band width: 5 µs
Temperature range: 0 – 55 °C
Weight: 55 g
Dimensions (W x L x H): 20 x 54 x 47,2 mm
Wiring description
Pin
Name
Arduino® connection
Yellow wire (PWM)
PWM signal input
PWM Pin (e.g. D9)
Red wire (VCC)
Supply voltage (5 V DC)
5V
Brown wire (GND)
Ground
GND