MANUAL EN SERVO – MG995 WPM603 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview The Whadda MG995 servo motor is a high-speed, metal gear servo motor . It can be used with most standard RC receivers, or with your own hardware that can output the required PWM signals such as an Arduino® compatible board. The servo comes with all of the required mounting hardware and a selection of arms suitable for a variety of applications. Specifications: Supply voltage: 4,8 – 7,2 V DC Stall torque: 83,4 N · cm (@ 4,8 V), 98,1 N · cm (@ 6 V) Operating speed : 0.2 s/60° (@ 4.8 V), 0.
Example program 1. Open the built-in example Sweep in the Arduino IDE by going to File > Examples > Servo > Sweep 2.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPM603 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
