Datasheet

VELLEMAN nv - Legen Heirweg 33, Gavere (Belgium)
vellemanprojects.com
VellemanProjects @Vel_Projects
BRIGHTDOT POWER & FUSE PACK (VMW111)
ACCESSORIES
This set is all you need to power up your Brightdot projects or
any other electronic circuit in a safe way.
Among other things, the set includes a battery pack for 3 x AA
batteries with an onboard on/o󰀨 switch and a connector wire
to connect it to the wearable development board. To give you
an idea; this battery pack can power a wearable development
board and 10 twinkling BrightDot LEDs (not modules) on full
brightness for more than 8 hours!
In order to keep your wearable project safe in case of shorting,
you can add the fuse board to the circuit. This board will protect
the batteries and thus prevent a re hazard. Use the included
connector cable to connect the fuse board to the development
board and you’re all set. Remember, you can never be too safe
with electronics kids!
Some extra fuses are also included in case you ‘fused up’ the
ones that are already onboard the fuse board. Check out the
features and specications below for more info!
• a fuse board
- Vin connectors:
- BAT1: soldering points for your own power connection
- BAT2: JST Connector for standard LiPo battery and/or our Alkaline battery pack
- Vout connector: JST
- fuses:
- a fuse to protect the LED circuit
- a fuse to protect the development board
• a battery pack for 3 x AA batteries (batteries not incl.)
• a fuse board to development board cable
• spare fuses (one of each kind)
• fuse board dimensions: W38 x L38 x H7,4mm
• fuse trip current LEDs: 500mA
• fuse trip current development board: 750mA
• fuse board max. forward voltage: 360mV
FEATURES
SPECIFICATIONS