Technical Manual

WH Münzprüfer Dietmar Trenner GmbH, Germany Technical Manual EMP 500 v7 /CLB
version 2.7
EMP 500 v7 /CLB subject to technical modification page 5/62
1. Introduction
The EMP 500 v7 /CLB offers multiple payment methods in one device. The
unit accepts coins and cashless payments. Developed to be more flexible
and to make e.g. laundrettes more convenient for users and operators.
The solution is supported by Android and IOS applications for mobile
devices with Bluetooth technology and mobile network.
Payment at the machine can be done with the easy-to-use wh
Münzprüfer’s “cashless laundry” app and supports PayPal and credit card
payments. Alternatively, the payment can be carried out with coins or an
RFID-key.
The EMP 500 v7 /CLB coin selector enables the operator to increase the
number of accepted payment methods within the same device. It is
retrofittable to previous EMP 500 series. No modification of the machine
is required.
When retrofitting, mobile app payments allow flexible pricing. The price is
to be read from the display of the machine and then adjusted in the
payment screen of the app. Flexible payment with RFID-key is not
possible. Alternatively, a fixed pricing of the machine is possible. Here
both cashless options are possible, RFID and app payment with the wh
cashless app.
The electrical outputs of the EMP 500 v7 /CLB have been especially
designed to facilitate the substitution of mechanical coin selectors such as
W 2000, W 6000 and W 7000 and electronic coin selectors of the EMP 500
v5 and v7 series, ensuring that only with minimal technical amendments
are required. We offer a range of front plates to ensure that no alteration
of the front plate cut-out is required on the machine.
The coin selector has an operation voltage of 8 to 30 DC or 12 to 24 AC
and is fitted with switching outputs that – depending on version used –
can totally replace the micro switches or opto-couplers of the mechanical
coin selectors.
In addition, the EMP 500 v7 /CLB can be supplied with an integrated
totalizer function (EMP 500 v7 /CLB, interface 06). Via the serial
programming connector, the selector can be operated with the MDB or
the ccTalk protocol.
Compared to previous EMP 500 v5 models the EMP 500 v7 has a new
mechanical design. The new design is even more solid and offers a higher
security against vandalism.
The coin selector generation v7 offers a combined optical and inductive
measuring system. The measuring system consists of various light
barriers and coil alignments, which are located directly behind the coin
insert in the flap and in the main body. It ensures a high coin acceptance
rate and an optimum rejection of counterfeits.
The EMP 500 v7 /CLB is equipped with a sophisticated coin monitoring as
a security provision against manipulation. Thus the EMP 500 v7 /CLB is
the ideal choice for all machines even for applications with high
requirements in regards to counterfeits detection and security against
manipulation.