Technical Manual
Table Of Contents
- 0. Safety Precautions
- 1. Introduction
- 2. Function of the Coin Selector
- 2.1. Introduction
- 2.2. Programming Connector
- 2.3. Programming of Coins
- 2.4. Coin Selector Output Signals
- 2.5. Coin Blocking
- 2.6. Currencies and Coins
- 2.7. Slave Channels
- 2.8. Coin Return
- 2.9. Safety Features
- 2.10. RFID Card Reader Functionality EMP 500 v7 /CLB
- 2.10.1. Install whcashless App
- 2.10.2. Creation of an Operator Account
- 2.10.3. Setting the Identity of a Coin Selector
- 2.10.4. Getting multiple Operator Keys
- 2.10.5. Setting the Price(s) of a Coin Selector
- 2.10.6. Setting the Price with a Price Setting Key
- 2.10.7. Personalize a CLB Pay Key
- 2.10.8. Loading CLB Pay Key with funds via PayPal
- 2.10.9. Use the CLB Pay Key
- 2.11. Bluetooth Functionality
- 3. The EMP 500 v7 /CLB with Interface 06 – 1 Price Totalizer
- 4.
- 4. Serial Interface
- 5. RS232 Interface
- 6. Coin Selector Label
- 7. Maintenance
- 8. EC Conformation Declaration
- 9. Compliance Statements FCC / ISED for EMP 500 v7 /CLB
- 10. Appendix
- 11. Applications
WH Münzprüfer Dietmar Trenner GmbH, Germany Technical Manual EMP 500 v7 /CLB
version 2.7
EMP 500 v7 /CLB subject to technical modification page 11/62
Fig. 2 Connection between a coin operated machine (controller), an
installed coin selector and a PC
Every coin selector is fully tested and configured at the factory
and is supplied ready for installation. Please make note of the
factory settings, or alternatively, read and store them on the
hard disk before making changes. The settings could be stored
with a file name incorporating the serial number. The coin
selector must be “read out” first and this procedure is
explained in the wheasy 5 manual.
Please also note the information on the coin selector label.
It is important that the coin selector be located in an upright
position when programming. Similarly, the bottom surface of
the coin selector needs to be horizontal. This can often be
achieved by mounting the coin selector in the same manner
that it is mounted in the coin-operated machine. Alternatively,
wh Münzprüfer can provide you with a purpose designed stand
T 500.
The following sections detail each Windows
TM
software wheasy 5 related
function of the coin selector. Each function has its own chapter as listed
in the table of contents in this manual.
Spannungs-
versorgung
Automat
K 548
Dongle
Power
supply
controller