User's Manual

II. Preparing for Usage
1. Screw barrel onto marker
2. Place barrel blocking device properly onto the marker
WARNING: Always wear paintball approved eye and face protection
when dealing with a pressurized paintball marker.
3. Pull the cocking rod back until it latches into place
4. Make sure your barrel blocking device is secured to the marker.
5. Connect the tank to the ASA (air system adapter.)
Note: Make sure to always get your cylinders filled by authorized, skilled and
knowledgeable technicians for the correct fill limits of each cylinder.
Do not try to refill cylinders by yourself. Do not use cylinders that
have not been properly maintained or that are damaged. WGP rec-
omends compressed air. Always be sure to only use ASTM compliant
tanks for your marker. Always use caution when refilling, attaching
and handling any type of air tank.
6. Attach the loader to the feed port of the marker
Note: Use only 0.68 caliber paintballs in your Worr Game Products
Autococker
®
marker. All WGP Autococker
®
markers are timed and
tested prior to leaving the factory.
Before field use, ensure the velocity is in compliance with field safety guidelines.
General field velocity limits are usually between 250-300 fps (feet per second).
Your paintball markers velocity should never exceed 300 fps. Observe and abide
by all local laws, regulations and field safety guidelines pertaining to the use of
paintball markers.
Wor r fr a m E Ma n u a l
Page 4