User Manual

Autococker® trilogy Select-Fire MAnuAl

II. PREPARING fOR USAGE
1. Screw barrel onto marker
2. Place barrel blocking device properly onto the marker
3. Pull the cocking rod back until it latches into place
4. Make sure the safety is pushed to the “PUSH SAFE” position.
5. Connect the tank to the ASA (air system adapter.)
NOTE: Make sure to always get your cylinders filled by authorized, skilled and knowledge-
able technicians for the correct fill limits of each cylinder. Do not try to refill cylinders
by yourself. Do not use cylinders that have not been properly maintained or that are
damaged. WGP recomends compressed air but C02 will work. Always be sure to only
use ASTM compliant tanks for your marker. Always use caution when refilling, attach-
ing and handling any type of air tank.
6. Attach the loader to the feed port of the marker
NOTE: Use only 0.68 caliber paintballs in your Worr Game Products Autococker® marker.
All WGP Autococker® markers are timed and tested prior to leaving the factory.
Before field use, ensure the velocity is in compliance with field safety guidelines. General field
velocity limits are usually between 250-300 fps (feet per second). Your paintball markers velocity
should never exceed 300 fps. Observe and abide by all local laws, regulations and field safety
guidelines pertaining to the use of paintball markers.
Always wear paintball approved eye and face protection when dealing with a pressurized
paintball marker.
WARNING:
Always wear paintball approved eye and face protection when dealing with a pressurized
paintball marker.