User Manual

Autococker® trilogy Select-Fire MAnuAl

VI. TROUbLESHOOTING
10. Marker fires and block comes back but wont go completely forward;
locks approximately halfway.
• Remove bolt and lubricate o-rings. Reinstall bolt making sure the hole between
the 2 o-rings is facing down.
• Paintball shell caught between bolt and body at feed tube. Ball detent screwed
in too tight. Remove and apply permanent strength thread lock to ball detent
threads making sure not to get any on or behind the ball Itself, Reinstall.
11. Always be sure that anytime you are working with your marker you are in a safe
environment. A safe environment is an area where you and every one within
200 yards is wearing paintball approved safety goggles and equipment. An area
that is netted in and meets ASTM-standard F1777-97. Also be sure to empty all
paintballs and exhaust all air from the marker before storing the marker
in a secure locked place.