User Manual

Autococker® trilogy Select-Fire MAnuAl

The tank o-ring
is located at the
top of your tank.
VI. TROUbLESHOOTING
5. Chops paintballs.
• Make sure your cocking rod is screwed all the way in.
• Paint is soft or swelled. Ensure that paint is not too large for barrel.
• Check loader and breech for foreign matter.
6. Hose blows off.
• Clip off worn tip and reinstall or call WGP
for service 800-755-5061.
7. Leaking between tank valve and marker air-receiver.
• Bad tank valve o-ring. Replace o-ring. This is the
external o-ring at the top of the tank.
8. Low velocity.
• Gas source pressure too low or tank empty. Fill tank.
• Improper IVG adjustment. Adjust velocity.
• Paint rolling down the barrel. Paint too small.
• Bolt upside down.
9. Gas leaks down the barrel.
• In a safe environment, oil your marker and fire it a few times to help seat the valve.
If you still hear excess air escaping from the marker, call WGP for service.