User Manual

Autococker® trilogy Select-Fire MAnuAl



Hand tighten cocking rod to ensure proper

function of your marker. This might become

loose after some use

e sure not to cross threAd.

VI. TROUbLESHOOTING

3. Marker will not ﬁre when trigger is pulled.

• Gas source pressure low or tank empty. Fill tank.

• Make sure the hole in your bolt, between the 2 o-rings is facing down.

• Make sure battery is installed, and has a good charge.

4. Marker will not cock or cocks every other time or less.

• Pressure too low. Fill tank.

• Velocity adjustment set too high.

• Back block or cocking rod adjustment incorrect.