User's Manual

9
VI. Cleaning Your Marker
CAUTION: Always make sure you and everyone around you wears protection
when you clean the marker or check it for paintballs.
It isn’t necessary to completely disassemble your marker to clean it. WGP
recommends the following cleaning be done after each day of play:
1. Remove air source and ensure that all air has been released from the marker.
2. Remove the barrel.
3. Lightly spray marker down with a 50-50 mix of rubbing alcohol and water
and then wipe down.
4. Wipe down the marker with a clean cloth, or blow off the marker with
compressed air (NOT CO
2
).
5. Remove bolt and lubricate bolt O-rings with petroleum jelly or lithium grease,
then reinstall. If you have a Delron bolt, do not lubricate.
6. Lubricate the threads and all moving parts with Vaseline, and reassemble.
7. WGP recommends that after every 4-5 days of play you place 3-4 drops
of 3 in 1 or other paintball marker specific oil in the air receiver and fire the
marker 10-15 times without the barrel. This will distribute the oil throughout
the marker and lubricate the internals.
Factory approved lubricants: • Petroleum Jelly
• Lithium Grease
• 3 in 1 Oil