User's Manual

1
Unscrew and remove USB port protective cap
from top of camera. (Illustration A)
2
With the YN1 Wi Module facing forward
(mounting tab to back), as illustrated below,
securely place onto the top of the camera so that
the USB prong ts snugly into the USB insert.
(Illustration B) Note: Do not force the USB plug
into port.
3
Securely mount the YN1 module to camera by
tightening the stabilizer screws on either side of
the YN1 module. (Illustration C)
PAGE 5
INSTALLATION ONTO X10 CAMERA
(Illustration A)
(Illustration B)