User's Manual

Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
Delay
PIR Mode Flextime Both
P1 P2 Interval
Still Video
24Hr Day Night
30sec 1min 2min 5min
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
Delay
PIR Mode Flextime Both
P1 P2 Interval
Still Video
24Hr Day Night
30sec 1min 2min 5min
Power Off
Power Port
Image Stamp
1.
WGI Cameras come standard with
an external power port. You must
open the weather resistant cover
and use a Wildgame Innovations
6 Volt camera battery accessory.
1.
To turn the unit off, first wake up
the LCD screen and then depress
and hold the power button until
the LCD turns off.
page 11
page 12
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
Delay
PIR Mode Flextime Both
P1 P2 Interval
Still Video
24Hr Day Night
30sec 1min 2min 5min
POWER
Delay
1.
Press the center navigation button
while Delay is selected. The
highlighted option will be blinking.
2.
Press the left or right navigation
button to move to different
options. Press the center naviga-
tion button to save the setting.
DELAY: The time before the camera is
able to take another picture.
PIR Mode: minimum 30s
FLEXTIME Mode: minimum 1 minute
Pictures Display:
08:15PM 11-12-2011 T08 0200
Time Date Moon Phase
Location
Photo
Count
Reset
Reset button located next to the
battery compartment. Push
button to reset settings back to
factory settings.
RESET
Mounting
When mounting to a tree, first latch
the 2 bungee cords through the
mounting holes on the left or right
side of the camera. Then, stretch
the cords around the tree and latch
the other ends of the bungee cords
through the mounting holes on the
opposite side of the camera.
1.