User Manual

WiFi Floor Guard & Door Guard EAS Systems
9
 J3 port of Adapter Box connects to the Transmit antenna (2 white wires).
 J1 port of the Adaptor Box connects to the figure “O” antenna.
 J2 port of the Adaptor Box connects to the figure “8” antenna. At this time there is no
connection required for figure “8”; only figure “O”.
 J5 port of the Adaptor Box connects the RX antenna to Adapter PCB (2pcs 2-core wires).
 J5-1 port of the Adaptor Box is the output port for RX antenna.
 SW5 is antenna phasing adjustment switch. Use this switch to adjust if the site is too noisy.
P1
P2
P3
P4
P5
P6
P7
P8
White
Green
Blue
Orange
P1
P2
P3
P4
Brown
Red
SW5