User's Manual

Common Platform WiFi EAS Systems

Power Cord Notices

The SPS delivered does not include AC cable for installation; we recommend that you use a CE approved

power cord H05 VV-F or H05 VVH2-F2 (Refer to the Electrical code which governs your country for

installation of an Anti-Theft Unit to the Main power Supply) with the cable specification and gauge

provided below.

North American Power Supply Cords

Here is a sample of qualified external power line at one end with three close loop lugs connector and a

molded receptacle terminal block at the other end. Conductors are color coded white (neutral), black (line)

and green or green/yellow (ground).

Operation of this equipment at voltages exceeding 130 VAC will require power supply cords which comply

with NEMA configurations.

The AC wire into the

insulation tube must be

no less than 5mm long.

For North America follow standard building wiring codes as defined by

the NEC or CEC. Also for North America, conduit size and knockout sizes are

specified in UL 60950-1 Annex NAE, Table NAE.2 and Table NAE.3 or the NEC

and CEC. (Licensed electricians should refer to these requirements from the

relative regulations.)

Closed loop lugs must be used as shown.