User's Manual

Premier Pro Installation Manual
27
Key ID C: Receiving Window Delay
(Range: 0-14; increment: 1)
You can input a number from 1-14. The larger the number, the later the receiving window will
be opened.
• Press [RE] – panel displays as per Figure 5.
• Input the parameter number.
• Press [CON] to accept the parameter.
Figure 5.
Key ID D: Noise Condition Display
(Range: 0-4)
There are two channel rows for noise display. The upper row displays for Channel 1, and the
lower row displays for Channel 2. Tag window and noise window noise is displayed by
switching to D1 and D2. The noise value range is 0 to 999. See details in the next table.
Note: If the noise condition display is open, the alarm will be deactivated unless you
input 0 to shut down the display.
• Press [NSE] – panel displays as per Figure 6.1.
• Input the parameter number.
• Press [CON] to accept the parameter – panel displays as per Figure 6.2.
Figure 6.1
Figure 6.2
CH 1
CH 2
C 4
d 4
94
- 13