User's Manual

Premier Pro Installation Manual
19
Fuse Replacement Information
Control Unit Fuse Replacement
The fuse holder is located on the control box side panel.
1. Equipment shall be electrically
disconnected from the branch-
circuit supply when replacing the
fuse.
2. Remove the fuse holder with a
screwdriver, rotating it in a
counterclockwise direction.
3. Replace the fuse in accordance
with the specification noted
below.
Fuse Replacement:
Slow Blow Fuse
5mm x 20mm 24vac@T3.15A/250V
WARNING
–
TO REDUCE THE RISK OF DAMAGE, REPLACE ONLY WITH
THE SAME FUSE TYPE AND RATING.
Counterclockwise
Power 24Vac
Fuse