User's Manual

13
QUICK START INSTRUCTIONS
General Setup and Use
Equipment must be electrically disconnected from the power supply
before connecting the antenna with the control box.
Connect deactivation antenna to the control box as noted in the section
named ―Deactivator Components and Connections‖.
Make sure the connectors are firmly attached to the sockets.
When all connections are ready, connect power and toggle the power switch.
The power LED will come on to indicate the unit is active.
Detection Range
DR Labels
Vertical……… 9cm (3.5 in)
HorizontalA .. ..10cm (4.0 in)
HorizontalB .. ...6cm (2.4 in)
Horizontal B
Horizontal A
Vertical orientation