User's Manual

12
Fuse replacement
Equipment shall be electrically disconnected from the branch-circuit
supply when replacing the fuse.
WARNING – TO REDUCE THE RISK OF DAMAGE. REPLACE ONLY WITH
SAME TYPE AND RATING OF FUSE.
There is another internal fuse inside the Control Box and located near the AC
input voltage selection swtich on the Lynx integrated board. If the system
goes dead and primary fuse on AC socket is not blown out, please check and
replace this fuse by professional service people to see if it bring back power to
control box circuit.
Fuse replacement
Extend fuse (time-delay fuse)
5mmx20mm 6.3A
Control box back view
Fuse replacement
SMD 5mmx20mm 0.5A