User's Manual

19
Press [PSW] button to activate the remote control, and then enter the
password (factory default is 68).
Input the number 68 (or the new password if you have changed it).
Press [CON] to instruct the Control Box to accept the password.
Note: Entering the wrong password input will disable the panel from further
instructions. Exit and re-press PSW to enter the correct password (see the
picture below). After THREE successive attempts with the wrong password
the remote control will be completely disabled. At this point you must turn the
unit on/off and begin again.
LAN
REMOTE CONTROL
0
LAN
REMOTE CONTROL
8 0 6
LAN
REMOTE CONTROL
r E r